accessories
-
VISIFILTER VF6 100 microns
Ref: A446 -
-
WATER PIPE PROTECTION FRAME
Ref: A358 -
VISIFILTER VF6 100 microns
Ref: A446 -
ADDITIONAL PUMP SPEED-FLOW
Ref: A556
Included :
Powerful pump (230 V / 370W)
Watertight control unit, easy to use.
Protection against dry running.
Temperature gauge.
Automatic air bleed valve.
Non-return ¾” (20x27)valves.
Powerful pump (230 V / 370W)
Watertight control unit, easy to use.
Protection against dry running.
Temperature gauge.
Automatic air bleed valve.
Non-return ¾” (20x27)valves.
To ensure greater efficiency without wasting energy, optimise your installation by using Ø 25 mm PE pipes (3/4”) and burying them in the ground as much as possible to absorb the heat from the soil. Insulate the lines above ground with a 13 mm foam jacket and protect them against the animals with the galvanised protection frame A358.
Install the SPEED-FLOW in a frost-free room or use heating wire to protect the water supply against frost.
In case of risk of high frost, or with non-burried pipes, add one or several THERMOFLOW (A301) heater to your circuit. They will work only if it is necessary.
Install the SPEED-FLOW in a frost-free room or use heating wire to protect the water supply against frost.
In case of risk of high frost, or with non-burried pipes, add one or several THERMOFLOW (A301) heater to your circuit. They will work only if it is necessary.
Puissance électrique (W) | 370 |
---|---|
Tension éléctrique (V) | 230 |
Longueur (mm) | 190 |
Largeur (mm) | 582 |
Hauteur (mm) | 342 |
Code barre | 3599150043212 |
Mode d'approvisionnement en eau | Water network |
Raccordement en eau | 3/4” |
- Vue éclatée des pièces 0480-SPEEDFLOW-THERMOFLOW.pdf (Size: 356.2 Kb)
- Notice de montage Montage_SPEEDFLOW-avant2015.pdf
- Notice de montage Montage_SPEEDFLOW.pdf (Size: 4.6 Mb)
Close
video title
video content